Nimbus Technologies, Dombivli

Serial Server

I & M 7000 Series Remote I/O Module‎
Send Enquiry

I-7000 and M-7000 remote I/O modules provide cost-effective protection and conditioning for a wide range of valuable industrial control system. The product line includes sensor-tocomputer,  computer-to-sensor, digital I/O, timer/counter, RS-232 to RS-485 converter, USB to RS-485 converter, RS-485 repeater, RS-485 hub and RS-232/422/485 to Fiber Optics. I-7000 supports DCON protocol, and M-7000 modules support Modbus RTU and DCON protocols. Many SCADA/HMI software and PLCs support Modbus RTU protocol. It is easy for them to integrate with M-7000 modules.

 

Features :

  • RS-485 Industrial Multi-Drop Network
  • I/O type and Range Programmable
  • Easy Mounting and Connection
  • Rugged Industrial Environment
  • Programmable Power-on Value and Safe Value
  • DI Latch Function
  • Low Speed Counter
  • ...

Read More...


Yes! I am interested


M 2000 Series Remote I/O Module‎
Send Enquiry

The M-2000 series is a family of network data acquisition and control modules with digital or analog I/O functions. The modules can be remotely controlled through an RS-485 serial bus by using DCON and Modbus RTU/ASCII protocols. The selectable transmission speed of the RS-485 port is up to 115,200 bps. Modbus has facto standard communications protocol in industry, and is now the most commonly available means of connecting industrial electronic devices. The M-2000 series is slim-type Form Factor I/O that provides the saving space for the installation, easy wiring and distributed I/O points applications. The bias resistor and terminal resistor by switch selectable that is used to improve the communication and solve the communication fail of RS-485 network.

 

Features :

  • RS-485 Industrial Multi-Drop Network
  • Communication Protocols...

Read More...


Yes! I am interested


M 6000 Series Remote I/O Module‎
Send Enquiry

The M-6000 series of distributed I/O provides a wide variety of input, output, and smart control solutions, all of which are based on a single universal hardware platform. The M-6000 series combines inputs and outputs, saving your time and space when both are at a premium. Since M-6000 series feature both inputs and outputs on the same board, retailers can reduce the space requirement for I/O boards by as much as 50%! Traditional I/O board schemes required retail operators to mount separate input and output boards within an enclosure, increasing the time and cost to mount the boards. The M-6000 I/O boards are communications devices needed to connect to the facility management system to control refrigeration, HVAC and lighting systems.

 

Features :

  • RS-485 Industrial Multi-Drop Network
  • Communication Protocols: Modbus RTU

Read More...


Yes! I am interested


TM Series Remote I/O Module
Send Enquiry

The tM series is a family of network data acquisition and control modules, providing digital I/O functions. The modules can be remotely controlled through an RS-485 serial bus by using DCON and Modbus RTU protocols. The selectable transmission speed of the RS-485 port is up to 115,200 bps. Modbus has become a de facto standard communications protocol in industry, and is now the most commonly available means of connecting industrial electronic devices. This makes the tM series perfect integration with the HMI, SCADA, PLC and other software systems.

 

Features :

  • Cost-effective remote I/O modules
  • Supports Modbus RTU and DCON protocols
  • Isolated Digital Input and Output
  • RS-485 bus supports baud rate up to 115200 bps
  • Dual-watchdog with power-on and safe value
  • Terminal block connector for easy wirin...

Read More...


Yes! I am interested


Microcontroller Based I/O Expansion Module
Send Enquiry

RU-87P1 is a remote intelligent I/O expansion unit that used to expand I-87K series I/O modules over the RS-485 for industrial monitoring and controlling applications. There are more than 50 I/O modules supported with the unit, including analog input/output, digital input/output, and counter/frequency I/O modules.

 

RU-87P1 is designed to be used in harsh and noisy environment, so the hardware is manufactured with wide power input range (10 ~ 30 VDC) and operating temperature (-25 °C ~ +75 °C). It simplifies installation and maintenance of I/O modules with hot swappable and auto configuration, fault and error detection, dual watchdog, programmable power on and Safe Values.

 

Various software development kits (SDK) and demos are provided, such as PACSDK, LabVIEW driver, InduSoft driver, Linux driver, OPC Server, etc. The I-87K series I/O mo...

Read More...


Yes! I am interested


High Speed Ethernet Data Acquisition Module
Send Enquiry

The PET-7H16M/PET-7H24M is a high speed data acquisition devices with a built-in POE Ethernet communication port for data transfer over a network. PET-7H16M includes 8 high-speed 16-bit single-ended Analog input channels (200 kHz sample and hold for all 8 channels) and PET-7H24M includes 4 high-speed 24-bit differential Analog input channels  (128 kHz sample and hold for all 4 channels). All high speed data acquisition modules allow A/D signal conversion simultaneously on each channel and provide the programmable input range on all analog input channels. In addition to supporting Analog Input channels, the module also provides Digital Input / Digital Output / Counter / Encoder with different combinations and different numbers of channels.

 

The module provides a programmable input range on all analog Input channels, and the Digital Output can be set to output w...

Read More...


Yes! I am interested


Ethernet Analog and Digital Remote I/O Module
Send Enquiry

The ET-7x00/PET-7x00, a web-based Ethernet I/O module, features a Built-in web server which allows configuration, I/O monitoring and I/O control by simply using a regular web browser. Remote control is as easy as surfing the Internet.

 

Besides Web HMI function, no more programming or HTML skills are required; creating dynamic and attractive web pages for I/O monitoring and I/O control would be fun to engineers ever after. The ET-7x00/PET-7x00 offers easy and safe access for users from anytime and anywhere! In addition, the ET-7x00/PET-7x00 also supports Modbus TCP protocol that makes perfect integration to SCADA software.

 

Furthermore, PET-7x00 features “PoE” that not only Ethernet but also power is carried through an Ethernet cable. This feature makes installation of PET-7x00 a piece of cake. Imagine that no more unnecessary wires, ...

Read More...


Yes! I am interested


Modbus RTU I/O Expansion Unit
Send Enquiry

iP-8411-MRTU series is a Modbus serial I/O expansion unit to expand I-8K and I-87K series I/O modules over the serial port for industrial monitoring and controlling applications. There are more than 50 I/O modules supported with the unit, including analog input/output, digital input/output, counter, frequency I/O modules. It is designed to be used in harsh and noisy environment, so the hardware is manufactured with wide power input range (10 ~ 30 VDC), isolated power input and can operate under wide temperature (-25 ~ +75 °C). To simplify installation and maintenance of I/O modules, it provides many useful features, such as: auto configuration, LED indicators for fault detection, dual watchdog to keep alive, programmable power on and safe values for safety.

 

Modbus is a very wide known protocol in the industrial manufacturing and environment monitoring fields. ...

Read More...


Yes! I am interested


80188-40 CPU and 3 Serial I/O Expansion Unit
Send Enquiry

The I-8410 is an embedded serial slave I/O expansion unit using DCON Protocol Firmware. ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc.

 

The CPU is a 8-bit 80188 (40 MHz). Apart from the original functions (input, output, power on value, safe value, high limit value, low limit value) of the I/O module, the firmware provides additional functions to allow I/O modules in different slots to be combined together. For example, if the channel value of an AI module is above a predefined high limit value, or below a predefined low limit value, the information can be immediately passed to another DO module to trigger alarm or light.

 

Various sof...

Read More...


Yes! I am interested